ENERGY SAVINGS
Save energy through its excellent thermal insulation properties, utilizing the low thermal conductivity of aerogel. Operating temperature range from -58°F to +248°F (-50°C ~ +120°C)
Aerogel Insulation Coating
Black Label
The Ultimate Aerogel Insulation Coating.
Performance
Boasting a thermal conductivity of 0.040W/mK,
thermal performance is unbeatable in its class.
roVa Shield Aerogel Insulation Coating Black Label provides the best protection against heat and cold.
Product Features
REDUCE COST
Lower energy cost by improving energy efficiency of industrial equipments and architectural buildings
SAFE TOUCH
Lower surface temperature of heated equipments an pipes in industrial plants and facilities for worker safety
ENVIRONMENTAL
Does not contain dangerous chemicals, VOCs (below 1 g/L), or bad odor
PREVENT CONDENSATION
Prevent condensation and moisture
SOUND DAMPENING
Lower sound and vibration in noisy engine rooms and chambers in aviation, shipping, and automotive vehicles
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White |
| Size | 4L, 18L (1.05, 4.76 Gallon) |
| Density | 0.5 ~ 0.6 g/cm3 |
| Viscosity | 12,000 ~ 16,000 cPs |
| VOCs | 0.3 g/L |
| Application Method | Brush, Roller, Airless Sprayer |
| Theoretical coverage | 0.8 m2/L (1mm thickness) 32.8 sq.ft./gallon (0.04″ thickness) |
| Solids by Volume | 60% |
| Application Thickness | 0.5 mm (2 ~ 3 coats) 0.02″ (2 ~ 3 coats) 20 mils (2 ~ 3 coats) |
| Dry to touch time | 3 ~ 4 hours (25°C, 77°F, Brush) |
| Cure time | 24 hours (25°C, 77°F, Brush, 1mm, 0.04″ thickness) |
| Storage | 12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%) |
| Thermal Conductivity | 0.040 ~ 0.045W/m·k |
| Application Temperature | 10 ~ 40°C 50 ~ 104°F |
| Operation Temperature | -50 ~ 120°C -58 ~ 248°F |
Variations of roVa Shield Black are also available.
Black HV
roVa Shield Black HV boasts an even better thermal insulation performance over the roVa Shield Black Original. Black HV has a thermal conductivity of 0.035 W/m·K and has a high viscosity “putty-like" texture due to its higher aerogel content. roVa Shield Black HV is ideal for areas where maximum thermal insulation performance is a must.
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White |
| Size | 4L, 18L (1.05, 4.76 Gallon) |
| Density | 0.5 ~ 0.6 g/cm3 |
| Viscosity | 34,000 ~ 42,000 cPs |
| VOCs | 1.3 g/L |
| Application Method | Brush, Coating knife, Scraper |
| Theoretical coverage | 0.56 m2/L (1mm thickness) 23 sq.ft./gallon (0.04″ thickness) |
| Solids by Volume | 55 ~ 60% |
| Application Thickness | 1 mm (2 ~ 3 coats) 0.04″ (2 ~ 3 coats) 40 mils (2 ~ 3 coats) |
| Dry to touch time | 5 hours (25°C, 77°F, Brush) |
| Cure time | 48 hours (25°C, 77°F, Brush, 1mm, 0.04″ thickness) |
| Storage | 12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%) |
| Thermal Conductivity | 0.035 ~ 0.040W/m·k |
| Application Temperature | 10 ~ 40°C 50 ~ 104°F |
| Operation Temperature | -50 ~ 120°C -58 ~ 248°F |
Black HT
roVa Shield Black HT extends the operating temperature range to +356°F (+180°C), making it more suitable for industrial application where higher temperature tolerance is required.
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White |
| Size | 4L, 18L (1.05, 4.76 Gallon) |
| Density | 0.55 ~ 0.58 g/cm3 |
| Viscosity | 20,000 ~ 25,000 cPs |
| Application Method | Brush, Roller, Airless Sprayer |
| Theoretical coverage | 0.62 m2/L (1.0 mm thickness) 25 sq.ft./gallon (0.04″ thickness) |
| Solids by Volume | 62% |
| Application Thickness | 1.0 mm (3 ~ 4 coats) 0.04″ (3 ~ 4 coats) 40 mils (3 ~ 4 coats) |
| Dry to touch time | 3 ~ 4 hours (25°C, 77°F, 50% humidity, Brush) |
| Cure time | 60 hours (25°C, 77°F, Brush, 0.5 mm, 0.02″ thickness) |
| Storage | 12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%) |
| Thermal Conductivity | 0.040 ~ 0.045W/m·k |
| Application Temperature | 10 ~ 80°C 50 ~ 176°F |
| Operation Temperature | -50 ~ 180°C -58 ~ 356°F |
Aerogel Insulation Coating
Green Label
The Ultimate Aerogel Insulation Coating,
made easy for everyday people.
Performance
Uniquely formulated for home owners and DIY enthusiasts, roVa Shield Aerogel Insulation Coating Green Label delivers a solid performance with a thermal conductivity of 0.055 W/m·K.
Product Features
ENERGY SAVINGS
Save energy through its excellent thermal insulation properties, utilizing the low thermal conductivity of aerogel. Operating temperature range from -58°F to +248°F (-50°C ~ +120°C)
REDUCE COST
Lower energy cost by improving energy efficiency of architectural buildings
EASY APPLICATION
White color paint that can be easily applied using ordinary paint equipment
ENVIRONMENTAL
Does not contain dangerous chemicals, VOCs (below 1 g/L), or bad odor
PREVENT CONDENSATION
Prevent condensation and moisture
SOUND DAMPENING
Lower sound and vibration in noisy engine rooms and chambers in aviation, shipping, and automotive vehicles
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White |
| Size | 4L, 18L (1.05, 4.76 Gallon) |
| Density | 0.6 ~ 0.7 g/cm3 |
| Viscosity | 8,000 ~ 10,000 cPs |
| VOCs | 0.7 g/L |
| Application Method | Brush, Roller, Airless Sprayer |
| Theoretical coverage | 1.26m2/L (500μm thickness) 51.2 sq.ft./gallon (0.02″ thickness) |
| Solids by Volume | 63% |
| Application Thickness | 0.5 mm (3 ~ 4 coats) 0.02″ (3 ~ 4 coats) 20 mils (3 ~ 4 coats) |
| Dry to touch time | 30min~ 1hour (25°C, 77°F, Brush) |
| Cure time | 24 hours (25°C, 77°F, Brush, 500μm, 0.02″ thickness) |
| Storage | 12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%) |
| Thermal Conductivity | 0.055 ~ 0.060W/m·k |
| Application Temperature | 10 ~ 40°C 50 ~ 104°F |
| Operation Temperature | -50 ~ 120°C -58 ~ 248°F |
More coating options are available.
SR Solar Reflective
roVa Shield SR Solar Reflective Aerogel Insulation Coating provides heat protection from solar radiation by reflecting off the hot solar rays, with the added benefit of thermal insulation properties provided by aerogel. This 2-in-1 functionality makes it ideal for roof tops and exterior walls that are exposed to sun light for an extended period of time. roVa Shield SR is a great “Cool Roof” solution for houses, buildings, factories, barns, pet houses, and vehicles such as RVs. Best if used in conjunction with roVa Shield Aerogel Insulation Coatings as a top coating.
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White |
| Size | 4L, 18L (1.05, 4.76 Gallon) |
| Density | 0.64 ~ 0.68 g/cm3 |
| Viscosity | 16,000 ~ 20,000 cPs |
| VOCs | 1.3 g/L |
| Solar Reflectance (Albedo) |
88.8% (300nm~2500nm) 89.5% (780nm~2500nm: infra-red) 88.4% (300nm~780nm: visible) |
| Application Method | Brush, Roller, Airless Sprayer |
| Theoretical coverage | 2.16 m2/L (0.3 mm thickness) 88 sq.ft./gallon (0.01″ thickness) |
| Solids by Volume | 65% |
| Application Thickness | 0.3 mm (1 ~ 2 coats) 0.01″ (1 ~ 2 coats) 12 mils (1 ~ 2 coats) |
| Dry to touch time | 4 hours (25°C, 77°F, 66~72% humidity, Brush) |
| Cure time | 24 hours (25°C, 77°F, Brush, 0.3 mm, 0.01″ thickness) |
| Storage | 12 months (10 ~ 30°C, 50 ~ 86°F, Humidity <80%) |
| Application Temperature | 10 ~ 35°C 50 ~ 95°F |
| Operation Temperature | -50 ~ 120°C -58 ~ 248°F |
Top Coating
roVa Shield Aerogel Top Coating offers a finishing option on top of roVa Shield Aerogel Insulation Coating. Both roVa Shield Green and roVa Shield Black have a soft surface when fully dried. This soft cushiony surface causes ordinary paint and top coating to crack when applied on top and limits them to those that can withstand the softness. roVa Shield Aerogel Top Coating is guaranteed to stay on without cracking. It has an eggshell finish and comes in six basic colors.
Technical Features
| Category | Feature |
| Coating Type | Water-based Acrylic |
| Color | White, Mint, Pink, Lemon, Grey, Skyblue |
| Size | 1L (1.06 Quart) |
| Density | 0.8 g/cm3 |
| Viscosity | 5,500 ~ 6,500 cPs |
| VOCs | 1.7 g/L |
| Application Method | Brush, Roller, Air Sprayer |
| Theoretical coverage | 7.2 ~ 7.6 m2/L (80 μm thickness) 77 sq.ft./quart (0.003″ thickness) |
| Dry to touch time | 20 min (25°C, 77°F, Brush) |
| Cure time | 24 hours (25°C, 77°F, Brush, 80 μm, 0.003″ thickness) |
| Application Temperature | 10 ~ 40°C 50 ~ 104°F |